機床商務網
詳細介紹
DESCRIPTION
?Better performance than conventional lathes
?3-step speeds, each in variable speed change
?Speed change by auto shifting
?More convenient turning processing control & spindle speed shown on rpm meter
?Braking controlled by quick inverter stop
?Through cross feeding at fixed spindle speed, you′ll get the fine accuracy & speed for slide face of round plate (similar to CSS function)
?Through cross feeding for step turning, the spindle speed change can match and achieve rapid effect
?Auto Threading System (opt.)
| Description/MODEL | Unit | MA-S5060(i) | MA-S5080(i) | MA-S50120(i) | MA-S50160(i) | MA-S50200(i) | MA-S50240(i) | MA-S50280(i) | ||||||||||
| CAPACITY |
|
| ||||||||||||||||
| Center height | mm | 665 | ||||||||||||||||
| Swing over bed | mm | 1270 | ||||||||||||||||
| Swing over gap | mm | 1720 | ||||||||||||||||
| Swing over cross slide | mm | 944 | ||||||||||||||||
| Distance between center | mm | 1700 | 2200 | 3200 | 4200 | 5200 | 6200 | 7200 | ||||||||||
| Bed width | mm | 610 | ||||||||||||||||
| SPINDLE |
|
| ||||||||||||||||
| Spindle bore | mm | Ø155(6") | Ø230(9")opt. | Ø255(10")opt. | Ø305(12")opt. | Large spindle bores are available on request | ||||||||||||
| Spindle nose | - | A2-11 | A2-15 | A2-15 | A2-20 | |||||||||||||
| Spindle speeds 18 steps | rpm | 5~615 | 4~430 | 4~430 | 2~390 | |||||||||||||
| Inverter type (Variable speeds) | H: 188~710 M: 40~187 L: 7~39 | H: 116~500 M: 31~115 L: 6~30 | H: 116~500 M: 31~115 L: 6~30 | H: 87~350 M: 26~86 L: 5~25 | ||||||||||||||
| TRAVEL |
|
| ||||||||||||||||
| Gross slide travel | mm | 700 | ||||||||||||||||
| Compound rest travel | mm | 380 | ||||||||||||||||
| TAILSTOCK |
|
| ||||||||||||||||
| Tailstock spindle dia. | mm | 165 | ||||||||||||||||
| Tailstock spindle travel | mm | 300 | ||||||||||||||||
| Tailstock spindle taper | - | MT#6 | ||||||||||||||||
| THREADS |
|
| ||||||||||||||||
| Lead screw | - | 2 TPI or 12 mm/pitch Ø55 | ||||||||||||||||
| Metric pitch threads | - | 1 - 30 mm | ||||||||||||||||
| Inch pitch threads |
| 30 - 1 TPI | ||||||||||||||||
| Module pitch threads | - | 0.5 - 15 M | ||||||||||||||||
| DP threads | - | 60 - 2 TPI | ||||||||||||||||
| FEEDING RANGE |
|
| ||||||||||||||||
| Range of longitudinal feeds | mm/rev. | 0.07 – 2.03 | ||||||||||||||||
| Range of cross feeds | mm/rev. | 0.028 - 0.81 | ||||||||||||||||
| MOTOR |
|
| ||||||||||||||||
| Main spindle motor | HP | 20 / 25 / 30(opt.) | ||||||||||||||||
| Coolant pump motor | HP | 1/6 | ||||||||||||||||
| WEIGHT |
|
| ||||||||||||||||
| Net Weight Approx. | kg | 6900 | 7300 | 8100 | 8900 | 9700 | 10500 | 11300 | ||||||||||
Note:
We have the right tomodify the specification or designs. If there are subjected to change without
prior notice.
MA-S5000 (i) Series
ACCESSORIES
| STANDARD ACCESSORIES |
| OPTIONAL ACCESSORIES |
| l Main drive motor | l CE conformity | |
| l Coolant equipment | l Gap bed | |
| l Magnetic brake for spindle motor | l Digital Readout System | |
| l 4-way tool post | l 3-Jaw scroll chuck | |
| l Six position rapid travel (including compound tool post) | l 4-jaw independent chuck | |
| l Tail stock | l Double chuck system | |
| l Center sleeve | l Rear chuck adaptor | |
| l Dead center | l Face plate type 4-jaw chuck | |
| l Tool box & tools | l Taper attachment | |
| l Independent Electrical Box | l Moving rear splash guard | |
| l Operation & Service Manual | l Chuck guard | |
|
|
| l Chip and coolant shield |
|
|
| l Leadscrew guard |
|
|
| l Work light |
|
|
| l Steady rest |
|
|
| l Follow rest |
|
|
| l Rotating center |
|
|
| l Grinding attachment |
|
|
| l Tailstock type (Build in type quill) |
機床商務網