SY-ZS 附止回閥注水型回轉油壓缸? 油缸體采用優質鋁合金制造，重量輕、體積小、經久耐用。? 高轉速狀態性能穩定。? 油缸內藏止回閥結構，突發壓降是仍可保持壓力。? 注水型回轉油壓缸可從后端供水。? 注水部無流體通過時，請勿運轉。? The cylinder body is made of high quality aluminum alloy, lightweight,small and durable.? High speed performance stabiling.? With built-in"check valve",work pieces can be effectively prevented from flying out during abrupt failure of pressure.? Waterflood rotary oil cylinder can be supplier from the back and.? The rotary cylinder should not run without liquid th......

產品參數

尺寸圖 Size Fig

 

尺寸參數 Dimensions(mm)

規格 Spec	A	B	D1	D2	E(H7)	F1	F2(H8)	G		H	M1	M2	M3
型號 Model								max	min
SY-75ZS	75	107	90	90	65	28	21	45	30	60	M20x35	M8x65	6-M8x16
SY-100ZS	100	132	115	100	80	28	21	45	25	77	M20x35	M8x80	6-M10x20
SY-125ZS	125	160	140	130	110	35	25	50		85	M24x40	M8x90	6-M12x20
SY-150ZS	150	190	170			45	31	55		98	M10x100	M10x100	12-M12x24

 

性能參數 Specifications

規格 Spec	活塞面積 Eff piston area(cm2)		活塞行程 Piston stroke(mm)	極限轉速 Max. Speed (r/min)	大使用壓力 Max. pressure MPa(kgf/cm2)	注氣部大使用壓力Air connection Max.pressure kgf/cm2(Mpa)	大推拉力 Max.pull force kgf(KN)		慣量 Moment of inertial (kg.m2)	重量 Weight(kg)
型號 Model	推側 Extend	拉側 Retract					推側 Extend	拉側 Retract
SY-75ZS	41.7	37	15	6000	40(4.0)	35(3.5)	1500(14.7)	1330(13)	0.02	4.6
SY-100ZS	75.4	70.8	20	5000			2710(26.6)	2550(25)	0.04	4.8
SY-125ZS	119.6	111.5	25				4300(42.1)	4010(39.3)	0.06	6.5
SY-150ZS	173.6	159.2	30				6250(61.2)	5730(56.1)	0.10	10.5

注: 回油管應單獨接回油槽內，且回油口要高于油面，以免產生背壓。
The drain port should be independently connected to oil tank to avoid back pressure.