2ZX 二爪指形動力卡盤? 采用工件端面夾緊，有效防止薄壁工件的夾持變形。? 內部的補償結構，夾持不規(guī)則端面的工件時可以自動調節(jié)。? 卡盤中心設置通孔，可裝工件氣密著座裝置，也可進行空氣噴射。? By clamping the end face of the workpiece, the clamping deformation of the thin-wallworkpiece can be effectively prevented.? The internal compensation structure can be adjusted automatically when the workpiece with irregular ends is clamped.? The center of the chuck is provided with a through hole, and the air tiht seat holder for the workpiece can be arranged,ａnd air injection can als......

產品參數

尺寸圖 Size Fig

 

尺寸參數 Dimensions(mm)

規(guī)格 Spec	A	B	C(H6)	D	F	G		H	J	K	L1	L2	M1	M2	M3	M4	R	S	J
型號 Model						max	min
2ZX-08	165	86	140	104.8	45	70	50	14	28	21	15	36-56	M16	M10	M10	3-M6	64	57.5	40
2ZX-06	210	90	170	133.4	56	75	55	16	38	20	18	50-70	M20	M12	M12	3-M8	104	77.5	53.5
2ZX-10	254	95	220	171.4		70	50				24			M16		6-M8	140	99.5	75.5

 

性能參數 Specifications

規(guī)格 Spec	楔心行程 Piunger stroke(mm)	爪行程(直徑) Jaw stroke(mm)	許用推拉力 Max.Pull force KN(kgf)	大夾緊力 Max. Gripping force KN(kgf)	極限轉速 Max. Speed (r/min)	夾緊范圍 Gripping range(mm)	慣量 Moment of inertial (kg.m2)	重量 Weight(kg)	適用油缸 Matching cylinder	大使用壓力 Max. pressure MPa(kgf/cm2)
型號 Model
2ZX-08	12	8	6(610)	5(510)	4000	55-79	0.04	9.8	SY-100	0.8(8)
2ZX-06			12(1224)	11(1120)	3500	75-106	0.12	20.3		1.7(17)
2ZX-10						119-150	0.28	30.7