M7180平面磨床

產品介紹：

l M7180平面磨床立柱采用雙層壁結構，提供高剛性支承，磨頭采用重錘式平衡，運動平穩，減輕絲桿負載，精度壽命*。

Double walled column structure, provide high rigid support .Adopt counterweight balance, make the spindle move stably, and reduce the load of the leadscrew , keep the accuracy for a long time.

l 獨立式、大容積集成液壓站，配備風冷和保壓裝置，隔絕熱源與震動源，為精密磨削提供優異動力

Independent,large capacity integrated hydraulic tank,standard equipped with air cooling and pressurizer,isolate heat and vibroseis, to provide excellent power for precision grinding.

l 上下采用高剛性矩形導軌，并貼有 TURCITE-B耐磨帶，磨擦系數低。

High rigidity rectangular guide way is designed on vertical motion,and coat with TURCITE-B belt,to get low friction coefficien

l 左右、前后導軌均采用平一V導軌結構，導向性好，導軌貼有耐磨帶，經過人工精密鏟刮，保證穩定的工作精度。

Flat-V guideway are adopt on longitudinal and cross way to get good guidance quality,and coat with TURCITE-B belt,precision handscraping to keep stable wok accuracy

l 前后、垂直進給由交流電機驅動，以電子手輪代替?zhèn)鹘y(tǒng)機械手輪，精度高，操作簡便

AC servo motor drives on cross and vertical motion MPG(electronic hand wheel )replaces the tradition mechanical hand wheel, which can realize higher accuracy and easy operation

l 采用西門子7寸高分辨率彩色觸摸屏，內置精心設計的磨削程序，強大、友好的人機交互方式，使操作簡便而富有樂趣。

Adopt SIEMENS 7 inch LCD-TFT colorful touch screen, built in program of our engineer’s genius designation to make the operation very simple and convenient for the operator.

l 磨頭主軸采用靜壓主軸（出口型采用 高精密滾動軸承主軸），高剛性，配合18.5KW電機，提供強勁動力，適合重載重切。主軸回轉由高剛性油膜支承，精度高，無磨損.

Adopt hydrostatic bearing for the spindle to get high rigidity(high precision rolling bearing foe export),together with 18.5KW motor to provide strong power, apply to the heavy duty machining. Spindle rotation is supported by rigidity oil film, no wear, ensure the long-time precision and life

l 精心設計的高牌號鑄鐵床身，為磨削提供強力基礎保證。

Well designed machine bed is one high grade casting piece, which insure heavy duty cutting

l 滑座，內部布有密筋，保證磨頭主軸重切時的穩定性。

Strengthen ribs are set inside of the rear slide base,make sure great stability support for spindle.

l 大功率磨頭主軸是本系列機床優良品質的核心，每一個細節無不精心設計與制作，不斷追求高剛性高精度的平衡。

Super great power spindle unit is most important to the machine.It is really an elaboraton under well designed,and our ultimate goal is to balance high rigidity and great accureacy.

l 前、后床身可靠組合成一個整體，為整機的精度、長時間工作提供保證。

The machine bed and rear slide bed are assembled to one piece,to supply super strong base for efficient working.

產品參數：